Power washing is the process of using a high-pressure stream of water to clean a variety of different surfaces and objects. It can be used for a wide range of projects, from cleaning your driveway to painting your house. Professional power washers are a great way to ensure that your house looks great, but if you have the equipment and the time, you can also complete some tasks on your own.
There are many ways that you can use a power washer to get your home clean. Some of these methods are more effective than others, so it’s important to do your research before you begin any project.
The most common type of power washing is pressure washing, which uses a low-pressure stream of water that’s ejected from a hose. This method is much less harsh on delicate surfaces, such as brick and concrete, so it’s a good choice for smaller jobs that need a quick clean.
However, it is not the best choice for removing large amounts of dirt and grime. While a higher pressure stream can make it easier to remove stubborn dirt, it can damage delicate surfaces or cause the water to evaporate quickly.
A hot water pressure washer, on the other hand, is a more powerful option that can remove thick buildups of grime. The heated element of this machine can make it quicker and easier to work on bigger jobs, such as your driveway or patio.
But it can be dangerous, too. The force of the steam can easily damage soft materials like wood, drywall and other softer siding. It’s best to use a power washer for large and heavy-duty jobs, such as cleaning parking lots or sidewalks.
It’s also a safe option for cleaning your car, provided you follow these tips:
Wear protective clothing (see the safety section) and stand a minimum of six feet away from your car when using a power washer. This will help reduce the risk of damage to window seals, badges and trim that could be affected by the pressure jet.
Apply detergent with a soap nozzle that’s black in color and spray it around two to three feet away from the surface of your vehicle. Once the soap has soaked in for a few minutes, start scrubbing it off with a microfiber mitt or sponge.
For cars that have a lot of grease or dirt, you can try to use a foam cannon instead of the soap nozzle. These can produce a dense foam that will help to keep your vehicle’s paint from drying out as quickly.
Depending on how dirty your car is, you may need to apply some more detergent than just a couple of sprays with the soap nozzle. This can be done by switching out the nozzle to one that’s a bit more aggressive, such as a 40-degree nozzle or a 25-degree nozzle.
It’s also a good idea to use a soft-bristled brush to scrub away any lingering spots of grease or dirt. Once you’ve wiped the car down, rinse it thoroughly with water. Then wipe it again with a clean microfiber towel and leave it to dry. You can also apply a coat of wax to protect the finish while you’re at it.
Power washing is not an easy task and requires special attention to detail. It is best to contact the your local pressure washing professionals to do the job for you as they are experienced with this type of work and have the tools required for this task.